Vape & Make
Items 1 - 30 of 50
Best sellers
Gap dimensions (for acrylic sheet)
- Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm sheet
- Gap length: 94.5mm (rounded corners)
- Gap depth 3 colors: 19.1mm, 7 colors: 18.4mm
LED version
-
3 colors: Warm white, neutral white, mixed
- Dimmer
-
7 colors: red, green, blue, yellow, cyan, pink, white
- Dimmer, color change, color transition (fast/slow)
Would you like other quantities or different combinations? Please contact us.
Best sellers
Gap dimensions (for acrylic sheet)
- Gap width: 5.1mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
- Gap length: Version 180mm: 150mm; 200mm: 170mm; 240mm: 210mm; 300mm: 270mm (rounded corners)
- Gap depth: 2.1mm
LED version
- Warm white (2700 Kelvin).
- Possible alternatives on request: warm white/neutral white/mixed or RGB.
Basic version
- Length 180mm, 200mm, 240mm or 300mm.
Other quantities or different combinations required? Please contact us.
Gap dimensions (for acrylic sheet)
- Gap width: 4.1mm (± 0.1mm). Suitable for 3 to 4mm acrylic sheet
- Gap length: 66.7mm (rounded corners)
- Gap depth: 17.5mm
LED version
- 7 colors: red, green, blue, yellow, cyan, pink, white
Would you like other quantities or different combinations? Please contact us.
Best sellers
Gap dimensions (for acrylic sheet)
- Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
- Gap length: 119mm (rounded corners)
- Gap depth 1 color: 22.3mm, 3 colors: 21.5mm, 7 colors: 19.5mm
LED version
- 1 color: warm white
-
3 colors: Warm white, neutral white, mixed
- Dimmer
-
7 colors: red, green, blue, yellow, cyan, pink, white
- Dimmer, color change, color transition (fast/slow)
Would you like other quantities or different combinations? Please contact us.
Gap dimensions (for acrylic sheet)
- Gap width: 4.7mm (± 0.1mm). Suitable for 3 to 4.5mm acrylic sheet
- Gap length: 71.5mm
- Gap depth: 16.3mm
LED version
- 16 colors (with remote control), 7 colors (with Smart Touch)
Would you like other quantities or different combinations? Please contact us.
- Made from neodymium-iron-boron (Nd2Fe14B)
- Surface nickel-plated (Ni-Cu-Ni)
- Various heights
- 8 pieces per pack.
- Original Analog Box Mods, Canada
- "Velvety soft" feel thanks to powder-coated surface.
- Individual motif engraved using CO² laser
- Each color-motif combination is unique
- Suitable for the DNA60 chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 14, 15cm each, red/black
- 2 x AWG 16, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Suitable for the DNA250C chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 12, 15cm each, red/black
- 2 x AWG 18, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Suitable for the DNA60 chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 14, 15cm each, red/black
- 2 x AWG 18, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Suitable for the DNA60C chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 14, 15cm each, red/black
- 2 x AWG 18, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Suitable for the DNA60 chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 14, 15cm each, red/black
- 2 x AWG 16, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
Top rated
Gap dimensions (for acrylic sheet)
- Gap width: 4.7mm (± 0.1mm). Suitable for 3 to 4.5mm acrylic sheet
- Gap length: 71.5mm
- Gap depth: 16.3mm
LED version
- 16 colors (with remote control), 7 colors (with Smart Touch)
- Dimming, flashing, color change, color transition
Would you like other quantities or different combinations? Please contact us.
New
Graduated prices for all magnets
Graduated prices for all magnets
Graduated prices for all magnets
- Complete build kit for the TLF# Squonker
- Developed in collaboration between TLF# and Vape & Make
- A Coil Master microfiber cloth for cleaning is included FREE of charge
- Kit contains all components except box, door, button and lock ring
Included components
- Copper plates: Made in Spain by MART&GON
- Liquid bottle: Vape & Make, ModMaker or Coil Master, depending on your choice
- 510 Botton Feeder Connector: Vape & Make or ReseT Mods depending on selection
- Magnets: Vape & Make
- Battery strap: Vape & Make
- Microfiber cloth: Coil Master, ideal for cleaning the squonker (but also suitable for glasses :-)
- Very space-saving with a total length of only 12.6 mm .
- Pleasant pressure point and not too loud "click" .
- Stable colors due to anodization .
- Made from aluminum/stainless steel .
- RoHs, REACH, IP67, IK08, CQC certification .
- Modding box with sliding lock.
- CNC machined from 6061-T6 aluminum.
- Sandblasted and anodized.
- Right-angled and the magnets are not continuous.
- Outside size: 102 x 51 x 28mm, inside size: 99.3 x 48.3 x 23mm.
- Very space-saving with a total length of only 15.8 mm .
- Pleasant and not too loud "click" .
- Stable colors due to anodization .
- Made from aluminum/stainless steel .
- RoHs, IP67, IK08 certification .
- Suitable for the usual "93PR" pots from TT Electronics .
- Made of 6061 aluminum, anodized .
- Radius inside: 13.07 mm, outside: 18.09 mm, height 4.03 mm .
- Potentiometer shown is not included in the scope of delivery.
- Suitable for the usual voltmeters used in mod construction
- Made of 6061 aluminum, anodized
- External dimensions: 30 x 18 x 4 mm
- Internal dimensions: 25 x 13 x 3 mm Voltmeter shown is not included in the scope of delivery
- Modding box with sliding lock
- CNC machined from 6061-T6 aluminum
- Sandblasted and anodized
- Special lid shape results in maximum usable interior space
- External size: 112 x 60.5 x 32mm, internal size: 108 x 57 x 28mm
Out of stock
- All necessary parts available.
- Box with sliding closure.
- Engraving (as an option) possible.
Technical design.
- Etileno PWM control.
- 2 x 21700 battery.
- 30mm top cap.
Included components.
- Box: Vape & Make 1590B with sliding cap.
- 510: ModMaker / Steathvape.
- Controller: Etileno PWM.
- Power button: Vape & Make.
- Battery holder: MosMax 2 x 21700.
- Cable: Silicone highly flexible, 2 x 30cm 14 AWG and 24 AWG each.
- +/- Warning stickers: Vape & Make, 4 pieces.
Important note: The battery holder offered here is not a product of the company "Keystone". The holder comes from "Blossom Electronics", the contacts from Keystone. We have combined both into our own product and sell it under the "Vape & Make" brand.
- Battery holder for 2 x 18650 lithium ion cells
- Made from nylon by injection molding
- Contacts 4 x Keystone 1107-1 plug-in contact with solder lug
Items 1 - 30 of 50