Vape & Make
- Five different colors .
- Fine adjustment by mini potentiometer on the back side . .
- Reverse polarity protection .
- 2.4 to 30 volts.
- Four different colors .
- Fine adjustment by mini potentiometer on the back side . .
- Reverse polarity protection .
- 0 to 100 volts .
- Resolution below 10V 0.01, above 10 volts 0.1.
- Fits the usual "93PR" pots from TT Electronics .
- Made of 6061 aluminum, anodized .
- Radius inside: 13,07 mm, outside: 18,09 mm, height 4,03 mm .
- Pictured potentiometer is not included.
- Fits the usual voltmeters in mod building.
- .
- made of 6061 aluminum, anodized
- .
- outside dimensions: 30 x 18 x 4 mm
- .
- inside dimensions: 25 x 13 x 3 mm Voltmeter shown does not belong to the scope of delivery
- Modding box with sliding closure.
- Made of 6061-T6 aluminum by CNC process.
- Sandblasted and anodized.
- Rectangular and recordings magnets not continuous.
- Outer size: 102 x 51 x 28mm, inner size: 99.3 x 48.3 x 23mm.
Important note: The battery holder offered here is not a product of the company "Keystone". The holder comes from "Blossom Electronics", the contacts from Keystone. We have combined both into our own product and sell this under the brand "Vape & Make".
- Battery holder for 2 x 18650 lithium ion cells
- Made of nylon by injection molding
- Contacts 4 x Keystone 1107-1 slide-in contact with solder lug
- Modding box with sliding closure
- Made of 6061-T6 aluminum by CNC process
- Sandblasted and anodized
- Special lid shape gives maximum, usable interior space
- Outer size: 112 x 60.5 x 32mm, inner size: 108 x 57 x 28mm
- Small handy box (86 x 44 x 28mm) with 21700 battery.
- Combined chip / battery holder.
- All soldering possible outside the box.
- Much tolerance upwards for all components.
Technical construction.
- EVOLV DNA 75 Color Board.
- 21700 Battery.
- 22mm Top Cap.
- Chip/battery holder glued in box (not screwed).
Documentation and Downloads.
- Information about the box: Assembly Instructions.pdf.
- Information about the DNA 75C: DNA 75 Color.pdf.
- EVOLV control software: EScribe.
Included components.
- Box: Analog Box Mods V1 incl. magnets.
- Button: Analog Box Mods.
- 510s: ModMaker 510 Micro, 22mm top cap.
- Controller: Evolv DNA 75C.
- Combined chip / battery holder: Vape & Make.
- Insulation box bottom: Vape & Make.
- Cable: Muldental silicone high flexible, 14 and 24 AWG.
- Battery contacts / solder lug: Keystone / Rosenberger.
- All required components.
- EVOLV DNA 250 color Board with reverse polarity protection.
- EVOLV DNA 75 color Board with reverse polarity protection.
- Designed for 2 batteries in series connection (2S).
- Outer dimension 89 x 61 x 28, inner dimension 84 x 57 x 24 mm
Technical construction
- 2 x 18650 battery, in series connection.
- EVOLV DNA 250 color Board with reverse polarity protection.
- EVOLV DNA 75 color Board with reverse polarity protection.
- 22mm Top Cap.
- Chip holder glued in box (not screwed).
Documentation and Downloads
Included components
- Box: Analog Box Mods V2 incl. magnets.
- 510s: Fat Daddy Vapes / ModMaker / Steathvape.
- Control: Eolv DNA 250C.
- Controller: Eolv DNA 75C.
- Chip holder: Vape & Make 3D laser sinter print.
- Button: Analog Box Mods.
- Battery holder: Vape & Make 2 x 18650, right side ground.
- Battery holder contacts: Keystone 4 x 1107-1.
- Cables: silicone high flex, 2 x 15cm each of 14 AWG, 16AWG and 24 AWG.
- +/- Warning stickers: Fat Daddy Vapes, 4 pieces.
- All required components.
- EVOLV Color Board with reverse polarity protection.
- Designed for 2 batteries in series connection (2S).
- Outer dimension 96 x 65 x 32, inner dimension 91 x 61 x 28 mm.
Technical construction.
- 2 x 20700/21700 battery, in series connection.
- EVOLV Color Board with reverse polarity protection.
- 22mm Top Cap.
- Chip holder glued in box (not screwed).
Documentation and Downloads.
Included components.
- Box: Analog Box Mods V2 including magnets.
- 510s: Fat Daddy Vapes / ModMaker / Steathvape.
- Controller: Eolv DNA 250C / DNA 75C.
- Chip holder: Vape & Make 3D printing.
- Button: Analog Box Mods.
- Battery holder: MosMax 2 x 21700.
- Cable: Silicone high flexible, 2 x 15cm each 14, 18 unbd 24 AWG.
- +/- Warning stickers: Fat Daddy Vapes, 4 pieces.
- All required components.
- EVOLV DNA 250 color Board with reverse polarity protection.
- Designed for Lipo battery.
- Outer dimension 125 x 65 x 40, inner dimension 120 x 61 x 36 mm.
Technical construction.
- EVOLV DNA 250 color board with reverse polarity protection.
- 30mm Top Cap.
- Chip holder glued in box (not screwed).
Documentation and Downloads.
Included components.
- Box: Analog Box Mods NX incl. magnets.
- 510s: Fat Daddy Vapes / Steathvape.
- Controller: Eolv DNA 250C.
- Chip holder: Vape & Make 3D printing.
- Button: Analog Box Mods.
- Cable: Silicone high flexible, 2 x 25cm each 14 AWG u. 24 AWG.
- Connector: Amass XT60 male and XT60 female.
Important note about LiPo battery.
Unfortunately we are not allowed to sell LiPo batteries. We recommend "Stefans LiPo Shop" (SLS). Suitable batteries at SLS are:.
- All necessary parts present.
- Box with sliding closure.
- Engraving (as an option) possible.
Technical construction.
- Etileno PWM control.
- 2 x 21700 battery.
- 30mm Top Cap.
Included components.
- Box: Vape & Make 1590B with sliding cap.
- 510s: ModMaker / Steathvape.
- Controller: Etileno PWM.
- Power button: Vape & Make.
- Battery holder: MosMax 2 x 21700.
- Cables: Silicone high flexibell, each 2 x 30cm 14 AWG u. 24 AWG.
- +/- Warning stickers: Vape & Make, 4 pieces.
- Printed by means of laser printing (SLS)
- Precise fit manufacturing, nothing wobbles here.
- To install, insert the chip / display into the holder. Then carefully press on the other side to full width (use both hands).
Included components
- Combined chip / battery holder: Vape & Make
- Insulation box bottom: Vape & Make
- Battery contacts: Keystone
- Solder lug: Rosenberger
- Complete build kit for the TLF# squonker.
- Developed in collaboration between TLF# and Vape & Make
- A Coil Master microfiber cloth for cleaning is included FREE of charge
- Kit includes all components except box, door, button and lock ring
Included components
- Copper sheets: Made in Spain by MART&GON
- Liquid Bottle: Vape & Make, ModMaker or Coil Master depending on your choice.
- 510 Botton Feeder Connector: Vape & Make or ReseT Mods depending on your selection.
- Magnets: Vape & Make
- Battery strap: Vape & Make
- Microfiber cloth: Coil Master. optimal for cleaning the squonker (but also good for glasses :-)
- 8 pieces
- .
- each 62 x 12 mm
- Developed in cooperation with our partner Feed3D Mods .
- Left-hand thread against accidental loosening .
- Adjustable nut (stop point sheet metal) with flattened contact point . .
- Complete plus-pole contacts gold-plated.
Gap dimensions (for acrylic sheet)
- Gap width: 4.7mm (± 0.1mm). Suitable for 3 to 4.5mm acrylic sheet
- Gap length: 71.5mm
- Gap depth: 16.3mm
LED version
- 16 colors (with remote control), 7 colors (with Smart Touch)
- Dimming, flashing, color change, color transition
Would you like other quantities or different combinations? Please contact us.
Pushbuttons in three different materials.
- Silver (stainless steel), black (anodized aluminium), golden yellow (brass)
- One power switch and 3 control switches
- Power button Ø 8mm, control button Ø 4mm
- For boxes with 2mm wall thickness
Gap dimensions (for acrylic sheet)
- Gap width: 4.7mm (± 0.1mm). Suitable for 3 to 4.5mm acrylic sheet
- Gap length: 71.5mm
- Gap depth: 16.3mm
LED version
- 16 colors (with remote control), 7 colors (with Smart Touch)
Would you like other quantities or different combinations? Please contact us.
- Printed in very high quality using SLS (Selective Laser Sintering).
- Precise fit, nothing wobbles here.
- To install the display , first connect the display to the board. Then insert the display into the holder and press it carefully and to full width (use both hands).
Gap dimensions (for acrylic sheet)
- Gap width: 4.1mm (± 0.1mm). Suitable for 3 to 4mm acrylic sheet
- Gap length: 66.7mm (rounded corners)
- Gap depth: 17.5mm
LED version
- 7 colors: red, green, blue, yellow, cyan, pink, white
Would you like other quantities or different combinations? Please contact us.
Gap dimensions (for acrylic sheet)
- Gapwidth: 5.2mm (± 0.1mm). Suitable for up to 5mm sheet
- Gaplength: 94.5mm (rounded corners)
- Gapdepth 3 colors: 19.1mm, 7 colors: 18.4mm
LED version
-
3 colors: Warm white, neutral white, mixed
- Dimmer
-
7 colors: red, green, blue, yellow, cyan, pink, white
- Dimmer, color change, color transition (fast/slow)
Would you like other quantities or different combinations? Please contact us.
Gap dimensions (for acrylic sheet)
- Gapwidth: 5.2mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
- Gaplength: 119mm (rounded corners)
- Gapdepth 1 color: 22.3mm, 3 colors: 21.5mm, 7 colors: 19.5mm
LED version
- 1 color: warm white
-
3 colors: Warm white, neutral white, mixed
- Dimmer
-
7 colors: red, green, blue, yellow, cyan, pink, white
- Dimmer, color change, color transition (fast/slow)
Would you like other quantities or different combinations? Please contact us.
- Special tool for tightening the Nano connector nut. .
- Not absolutely necessary - but makes the assembly much easier .
- Use only for assembly, not to adjust the pin height later!
Gap dimensions (for acrylic sheet)
- Gapwidth: 5.1mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
- Gaplength: Version 180mm: 150mm; 200mm: 170mm; 240mm: 210mm; 300mm: 270mm (rounded corners)
- Gapdepth: 2.1mm
LED version
- Warm white (2700 Kelvin).
- Possible alternatives on request: warm white/neutral white/mixed or RGB.
Basic version
- Length 180mm, 200mm, 240mm or 300mm.
Other quantities or different combinations required? Please contact us.
- Developed in cooperation with our partner Feed3D Mods .
- Height adjustable mounting on 510 .
- Protection against twisting when screwing on / off the evaporator . .
- Flattened stop plate for maximum current flow . .
- Three variants, with a total of 6 different distances from connector / to the sheet metal.
- Sizes specially adapted for modding
- From 2mm cable (AWG22) up to 510s, pushbuttons, mosfet
- In the colors red and black
- Shrink ratio 2:1
- Lock Ring designed for the ReseT ModS 510 Squonk Connector.
- Perfect fit for the ReseT nut.
- Lock ring for the nut of the Moddog Nano connector .
- Exact fit for the ModDog 15mm nut.