Vape & Make

• All required components.
• EVOLV Color Board with reverse polarity protection.
• Designed for 2 batteries in series connection (2S).
• External dimensions 96 x 65 x 32, internal dimensions 91 x 61 x 28 mm.

Technical design.

• 2 x 20700/21700 batteries, connected in series.
• EVOLV Color Board with reverse polarity protection.
• 22mm top cap.
• Chip holder glued in box (not screwed).

Documentation and downloads.

• Technical manual DNA 75C
• Technical manual DNA 250C
• Escripe configuration software

Included components.

• Box: Analog Box Mods V2 incl. magnets.
• 510: Fat Daddy Vapes / ModMaker / Steathvape.
• Controller: Eolv DNA 250C / DNA 75C.
• Chip holder: Vape & Make 3D print.
• Button: Analog Box Mods.
• Battery holder: MosMax 2 x 21700.
• Cable: Silicone highly flexible, 2 x 15cm 14, 18 and 24 AWG each.
• +/- Warning stickers: Fat Daddy Vapes, 4 pieces.

• Original Analog Box Mods, Canada
• "Velvety soft" feel thanks to powder-coated surface.
• Individual motif engraved using CO² laser
• Each color-motif combination is unique

• All required components.
• EVOLV DNA 250 color Board with reverse polarity protection.
• EVOLV DNA 75 color Board with reverse polarity protection.
• Designed for 2 batteries in series connection (2S)
• External dimensions 89 x 61 x 28, internal dimensions 84 x 57 x 24 mm

Technical structure

• 2 x 18650 batteries, connected in series.
• EVOLV DNA 250 color Board with reverse polarity protection.
• EVOLV DNA 75 color Board with reverse polarity protection.
• 22mm top cap.
• Chip holder glued in box (not screwed).

Documentation and downloads

• Technical manual DNA 250C.
• Technical manual DNA 250C.
• Escripe configuration software.

Included components

• Box: Analog Box Mods V2 incl. magnets.
• 510: Fat Daddy Vapes / ModMaker / Steathvape.
• Controller: Eolv DNA 250C.
• Controller: Eolv DNA 75C.
• Chip holder: Vape & Make 3D laser sinter print.
• Button: Analog Box Mods.
• Battery holder: Vape & Make 2 x 18650, ground on the right side.
• Battery holder contacts: Keystone 4 x 1107-1
• Cable: Silicone highly flexible, 2 x 15cm each 14 AWG, 16AWG and 24 AWG.
• +/- Warning stickers: Fat Daddy Vapes, 4 pieces.

• Small, handy box (86 x 44 x 28mm) with 21700 battery.
• Combined chip / battery holder.
• All soldering work possible outside the box.
• Plenty of tolerance for all components.

Technical structure.

• EVOLV DNA 75 Color Board.
• 21700 battery.
• 22mm top cap.
• Chip/battery holder glued in box (not screwed).

Documentation and downloads.

• Information about the box: Assembly instructions.pdf.
• Information about the DNA 75C: DNA 75 Color.pdf.
• EVOLV control software: EScribe.

Included components.

• Box: Analog Box Mods V1 incl. magnets.
• Button: Analog Box Mods.
• 510: ModMaker 510 Micro, 22mm top cap.
• Controller: Evolv DNA 75C.
• Combined chip/battery holder: Vape & Make.
• Insulation box bottom: Vape & Make.
• Cable: Muldental silicone high flexible, 14 and 24 AWG.
• Battery contacts / solder lug: Keystone / Rosenberger.

• All necessary parts available.
• Box with sliding closure.
• Engraving (as an option) possible.

Technical design.

• Etileno PWM control.
• 2 x 21700 battery.
• 30mm top cap.

Included components.

• Box: Vape & Make 1590B with sliding cap.
• 510: ModMaker / Steathvape.
• Controller: Etileno PWM.
• Power button: Vape & Make.
• Battery holder: MosMax 2 x 21700.
• Cable: Silicone highly flexible, 2 x 30cm 14 AWG and 24 AWG each.
• +/- Warning stickers: Vape & Make, 4 pieces.

• Complete build kit for the TLF# Squonker
• Developed in collaboration between TLF# and Vape & Make
• A Coil Master microfiber cloth for cleaning is included FREE of charge
• Kit contains all components except box, door, button and lock ring

Included components

• Copper plates: Made in Spain by MART&GON
• Liquid bottle: Vape & Make, ModMaker or Coil Master, depending on your choice
• 510 Botton Feeder Connector: Vape & Make or ReseT Mods depending on selection
• Magnets: Vape & Make
• Battery strap: Vape & Make
• Microfiber cloth: Coil Master, ideal for cleaning the squonker (but also suitable for glasses :-)

• Two copper sheets suitable for the TLF#
• With some adaptation also suitable for many other squonkers
• Hole for 510 pre-drilled, elevations for battery support
• Rounded corners, de-radiused.

• Modding box with sliding lock
• CNC machined from 6061-T6 aluminum
• Sandblasted and anodized
• Special lid shape results in maximum usable interior space
• External size: 112 x 60.5 x 32mm, internal size: 108 x 57 x 28mm

• Modding box with sliding lock.
• CNC machined from 6061-T6 aluminum.
• Sandblasted and anodized.
• Right-angled and the magnets are not continuous.
• Outside size: 102 x 51 x 28mm, inside size: 99.3 x 48.3 x 23mm.

• Very space-saving with a total length of only 15.8 mm .
• Pleasant and not too loud "click" .
• Stable colors due to anodization .
• Made from aluminum/stainless steel .
• RoHs, IP67, IK08 certification .

Gap dimensions (for acrylic sheet)

• Gap width: 5.1mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
• Gap length: Version 180mm: 150mm; 200mm: 170mm; 240mm: 210mm; 300mm: 270mm (rounded corners)
• Gap depth: 2.1mm

LED version

• Warm white (2700 Kelvin).
• Possible alternatives on request: warm white/neutral white/mixed or RGB.

Basic version

• Length 180mm, 200mm, 240mm or 300mm.

Other quantities or different combinations required? Please contact us.

• Super soft silicone with a dark tint .
• Height-adjustable thanks to two accordion ribs. The height is between 45 and 50 mm .
• Capacity 6 to 8ml (without tube). The diameter is 17mm .
• Closure 13 mm, extra tight .
• Tested for food safety by the SGS Institut Fresenius .

Gap dimensions (for acrylic sheet)

• Gap width: 4.1mm (± 0.1mm). Suitable for 3 to 4mm acrylic sheet
• Gap length: 66.7mm (rounded corners)
• Gap depth: 17.5mm

LED version

• 7 colors: red, green, blue, yellow, cyan, pink, white

Would you like other quantities or different combinations? Please contact us.

• Developed in cooperation with our partner Feed3D Mods .
• Left-hand thread to prevent accidental loosening .
• Adjustable nut (sheet metal stop point) with flattened contact point .
• Complete plus-pole contacts gold-plated.

Gap dimensions (for acrylic sheet)

• Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
• Gap length: 119mm (rounded corners)
• Gap depth 1 color: 22.3mm, 3 colors: 21.5mm, 7 colors: 19.5mm

LED version

• 1 color: warm white
• 3 colors: Warm white, neutral white, mixed
  • Dimmer
• 7 colors: red, green, blue, yellow, cyan, pink, white
  • Dimmer, color change, color transition (fast/slow)

Would you like other quantities or different combinations? Please contact us.

• Very space-saving with a total length of only 12.6 mm .
• Pleasant pressure point and not too loud "click" .
• Stable colors due to anodization .
• Made from aluminum/stainless steel .
• RoHs, REACH, IP67, IK08, CQC certification .

Gap dimensions (for acrylic sheet)

• Gap width: 4.7mm (± 0.1mm). Suitable for 3 to 4.5mm acrylic sheet
• Gap length: 71.5mm
• Gap depth: 16.3mm

LED version

• 16 colors (with remote control), 7 colors (with Smart Touch)

Would you like other quantities or different combinations? Please contact us.

• The best of both worlds, the V&M Okto silicone bottle
• As much content as a square bottle and a pleasant squeezing sensation like a round bottle
• Extra flat Ultem cap for more content and with a width of only 14.5 mm for more space in the mod
• Bottle with 2.4 ml capacity (18350), diameter 17.5 mm, height 21 mm

Gap size (for acrylic sheet)

• Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm plate
• Split length: 94.5mm (rounded corners)
• Gap depth 3 colors: 19.1mm, 7 colors: 18.4mm

LED version

• 3 colors: warm white, neutral white, mixed
• Dimming

Different quantities or different composition desired? Contact us