Vape & Make
Items 1 - 50 of 51
- All required components.
- EVOLV DNA 250 color board with reverse polarity protection.
- Designed for Lipo battery.
- External dimensions 125 x 65 x 40, internal dimensions 120 x 61 x 36 mm.
Technical structure.
- EVOLV DNA 250 color board with reverse polarity protection.
- 30mm top cap.
- Chip holder glued in box (not screwed).
Documentation and downloads.
Included components.
- Box: Analog Box Mods NX incl. magnets.
- 510: Fat Daddy Vapes / Steathvape.
- Controller: Eolv DNA 250C.
- Chip holder: Vape & Make 3D print.
- Button: Analog Box Mods.
- Cable: Silicone highly flexible, 2 x 25cm 14 AWG and 24 AWG each.
- Plug: Amass XT60 male and XT60 female.
Important note about the LiPo battery.
Unfortunately we are not allowed to sell LiPo batteries. We recommend "Stefan's LiPo Shop" (SLS). Suitable batteries at SLS are:.
Top rated
- All required components.
- EVOLV Color Board with reverse polarity protection.
- Designed for 2 batteries in series connection (2S).
- External dimensions 96 x 65 x 32, internal dimensions 91 x 61 x 28 mm.
Technical design.
- 2 x 20700/21700 batteries, connected in series.
- EVOLV Color Board with reverse polarity protection.
- 22mm top cap.
- Chip holder glued in box (not screwed).
Documentation and downloads.
Included components.
- Box: Analog Box Mods V2 incl. magnets.
- 510: Fat Daddy Vapes / ModMaker / Steathvape.
- Controller: Eolv DNA 250C / DNA 75C.
- Chip holder: Vape & Make 3D print.
- Button: Analog Box Mods.
- Battery holder: MosMax 2 x 21700.
- Cable: Silicone highly flexible, 2 x 15cm 14, 18 and 24 AWG each.
- +/- Warning stickers: Fat Daddy Vapes, 4 pieces.
- Original Analog Box Mods, Canada
- "Velvety soft" feel thanks to powder-coated surface.
- Individual motif engraved using CO² laser
- Each color-motif combination is unique
- All required components.
- EVOLV DNA 250 color Board with reverse polarity protection.
- EVOLV DNA 75 color Board with reverse polarity protection.
- Designed for 2 batteries in series connection (2S)
- External dimensions 89 x 61 x 28, internal dimensions 84 x 57 x 24 mm
Technical structure
- 2 x 18650 batteries, connected in series.
- EVOLV DNA 250 color Board with reverse polarity protection.
- EVOLV DNA 75 color Board with reverse polarity protection.
- 22mm top cap.
- Chip holder glued in box (not screwed).
Documentation and downloads
Included components
- Box: Analog Box Mods V2 incl. magnets.
- 510: Fat Daddy Vapes / ModMaker / Steathvape.
- Controller: Eolv DNA 250C.
- Controller: Eolv DNA 75C.
- Chip holder: Vape & Make 3D laser sinter print.
- Button: Analog Box Mods.
- Battery holder: Vape & Make 2 x 18650, ground on the right side.
- Battery holder contacts: Keystone 4 x 1107-1
- Cable: Silicone highly flexible, 2 x 15cm each 14 AWG, 16AWG and 24 AWG.
- +/- Warning stickers: Fat Daddy Vapes, 4 pieces.
Out of stock
- Small, handy box (86 x 44 x 28mm) with 21700 battery.
- Combined chip / battery holder.
- All soldering work possible outside the box.
- Plenty of tolerance for all components.
Technical structure.
- EVOLV DNA 75 Color Board.
- 21700 battery.
- 22mm top cap.
- Chip/battery holder glued in box (not screwed).
Documentation and downloads.
- Information about the box: Assembly instructions.pdf.
- Information about the DNA 75C: DNA 75 Color.pdf.
- EVOLV control software: EScribe.
Included components.
- Box: Analog Box Mods V1 incl. magnets.
- Button: Analog Box Mods.
- 510: ModMaker 510 Micro, 22mm top cap.
- Controller: Evolv DNA 75C.
- Combined chip/battery holder: Vape & Make.
- Insulation box bottom: Vape & Make.
- Cable: Muldental silicone high flexible, 14 and 24 AWG.
- Battery contacts / solder lug: Keystone / Rosenberger.
Out of stock
- All necessary parts available.
- Box with sliding closure.
- Engraving (as an option) possible.
Technical design.
- Etileno PWM control.
- 2 x 21700 battery.
- 30mm top cap.
Included components.
- Box: Vape & Make 1590B with sliding cap.
- 510: ModMaker / Steathvape.
- Controller: Etileno PWM.
- Power button: Vape & Make.
- Battery holder: MosMax 2 x 21700.
- Cable: Silicone highly flexible, 2 x 30cm 14 AWG and 24 AWG each.
- +/- Warning stickers: Vape & Make, 4 pieces.
- Complete build kit for the TLF# Squonker
- Developed in collaboration between TLF# and Vape & Make
- A Coil Master microfiber cloth for cleaning is included FREE of charge
- Kit contains all components except box, door, button and lock ring
Included components
- Copper plates: Made in Spain by MART&GON
- Liquid bottle: Vape & Make, ModMaker or Coil Master, depending on your choice
- 510 Botton Feeder Connector: Vape & Make or ReseT Mods depending on selection
- Magnets: Vape & Make
- Battery strap: Vape & Make
- Microfiber cloth: Coil Master, ideal for cleaning the squonker (but also suitable for glasses :-)
- Two copper sheets suitable for the TLF#
- With some adaptation also suitable for many other squonkers
- Hole for 510 pre-drilled, elevations for battery support
- Rounded corners, de-radiused.
- Modding box with sliding lock
- CNC machined from 6061-T6 aluminum
- Sandblasted and anodized
- Special lid shape results in maximum usable interior space
- External size: 112 x 60.5 x 32mm, internal size: 108 x 57 x 28mm
- Modding box with sliding lock.
- CNC machined from 6061-T6 aluminum.
- Sandblasted and anodized.
- Right-angled and the magnets are not continuous.
- Outside size: 102 x 51 x 28mm, inside size: 99.3 x 48.3 x 23mm.
Out of stock
- Printed using laser printing (SLS)
- Precisely fitting production, nothing wobbles here.
- To install, insert the chip / display into the holder. Then press carefully on the other side over the full width (use both hands).
Included components
- Combined chip / battery holder: Vape & Make
- Insulation box bottom: Vape & Make
- Battery contacts: Keystone
- Soldering lug: Rosenberger
Best sellers
- Very space-saving with a total length of only 15.8 mm .
- Pleasant and not too loud "click" .
- Stable colors due to anodization .
- Made from aluminum/stainless steel .
- RoHs, IP67, IK08 certification .
Gap dimensions (for acrylic sheet)
- Gap width: 5.1mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
- Gap length: Version 180mm: 150mm; 200mm: 170mm; 240mm: 210mm; 300mm: 270mm (rounded corners)
- Gap depth: 2.1mm
LED version
- Warm white (2700 Kelvin).
- Possible alternatives on request: warm white/neutral white/mixed or RGB.
Basic version
- Length 180mm, 200mm, 240mm or 300mm.
Other quantities or different combinations required? Please contact us.
- Super soft silicone with a dark tint .
- Height-adjustable thanks to two accordion ribs. The height is between 45 and 50 mm .
- Capacity 6 to 8ml (without tube). The diameter is 17mm .
- Closure 13 mm, extra tight .
- Tested for food safety by the SGS Institut Fresenius .
Out of stock
Gap dimensions (for acrylic sheet)
- Gap width: 4.1mm (± 0.1mm). Suitable for 3 to 4mm acrylic sheet
- Gap length: 66.7mm (rounded corners)
- Gap depth: 17.5mm
LED version
- 7 colors: red, green, blue, yellow, cyan, pink, white
Would you like other quantities or different combinations? Please contact us.
- Developed in cooperation with our partner Feed3D Mods .
- Left-hand thread to prevent accidental loosening .
- Adjustable nut (sheet metal stop point) with flattened contact point .
- Complete plus-pole contacts gold-plated.
Best sellers
Gap dimensions (for acrylic sheet)
- Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
- Gap length: 119mm (rounded corners)
- Gap depth 1 color: 22.3mm, 3 colors: 21.5mm, 7 colors: 19.5mm
LED version
- 1 color: warm white
-
3 colors: Warm white, neutral white, mixed
- Dimmer
-
7 colors: red, green, blue, yellow, cyan, pink, white
- Dimmer, color change, color transition (fast/slow)
Would you like other quantities or different combinations? Please contact us.
- Very space-saving with a total length of only 12.6 mm .
- Pleasant pressure point and not too loud "click" .
- Stable colors due to anodization .
- Made from aluminum/stainless steel .
- RoHs, REACH, IP67, IK08, CQC certification .
Gap dimensions (for acrylic sheet)
- Gap width: 4.7mm (± 0.1mm). Suitable for 3 to 4.5mm acrylic sheet
- Gap length: 71.5mm
- Gap depth: 16.3mm
LED version
- 16 colors (with remote control), 7 colors (with Smart Touch)
Would you like other quantities or different combinations? Please contact us.
- The best of both worlds, the V&M Okto silicone bottle
- As much content as a square bottle and a pleasant squeezing sensation like a round bottle
- Extra flat Ultem cap for more content and with a width of only 14.5 mm for more space in the mod
- Bottle with 2.4 ml capacity (18350), diameter 17.5 mm, height 21 mm
Best sellers
Gap dimensions (for acrylic sheet)
- Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm sheet
- Gap length: 94.5mm (rounded corners)
- Gap depth 3 colors: 19.1mm, 7 colors: 18.4mm
LED version
-
3 colors: Warm white, neutral white, mixed
- Dimmer
-
7 colors: red, green, blue, yellow, cyan, pink, white
- Dimmer, color change, color transition (fast/slow)
Would you like other quantities or different combinations? Please contact us.
Top rated
Gap dimensions (for acrylic sheet)
- Gap width: 4.7mm (± 0.1mm). Suitable for 3 to 4.5mm acrylic sheet
- Gap length: 71.5mm
- Gap depth: 16.3mm
LED version
- 16 colors (with remote control), 7 colors (with Smart Touch)
- Dimming, flashing, color change, color transition
Would you like other quantities or different combinations? Please contact us.
- Four push buttons for Evolv DNA boards. One large power button (Ø 8mm) and three small control buttons (Ø 4mm)
- Length optimized for boxes with a wall thickness of 2mm
- Three different colours/materials: silver (stainless steel), black (anodized aluminium), golden yellow (brass)
- The rescue for every cell with a damaged casing
- Complete protection for 2 x 18650 cells
- Double silicone cover with fixing eyelet
- 10 x heat shrink tubing in Coil Master design
- Ideal for on the go but also a safe solution at home
Important note: The battery holder offered here is not a product of the company "Keystone". The holder comes from "Blossom Electronics", the contacts from Keystone. We have combined both into our own product and sell it under the "Vape & Make" brand.
- Battery holder for 2 x 18650 lithium ion cells
- Made from nylon by injection molding
- Contacts 4 x Keystone 1107-1 plug-in contact with solder lug
- Suitable for the usual "93PR" pots from TT Electronics .
- Made of 6061 aluminum, anodized .
- Radius inside: 13.07 mm, outside: 18.09 mm, height 4.03 mm .
- Potentiometer shown is not included in the scope of delivery.
- Lock ring for the nut of the Moddog Nano connector .
- Perfect fit for the ModDog 15mm socket.
- Special tool for tightening the Nano connector nut. .
- Not absolutely necessary - but makes assembly much easier .
- Use only for assembly, not to adjust the pin height later!
- Made from stainless steel .
- Black color applied with VaKuum process .
- Diameter 12mm, stop 1mm .
- Total height 4.1 mm .
- Concave rounding on the actuation side.
- Suitable for the usual voltmeters used in mod construction
- Made of 6061 aluminum, anodized
- External dimensions: 30 x 18 x 4 mm
- Internal dimensions: 25 x 13 x 3 mm Voltmeter shown is not included in the scope of delivery
- Five different colors .
- Fine adjustment via mini potentiometer on the back .
- Reverse polarity protection .
- 2.4 to 30 volts.
- Four different colors .
- Fine adjustment via mini potentiometer on the back .
- Reverse polarity protection .
- 0 to 100 volts .
- Resolution below 10V 0.01, above 10 volts 0.1.
- Suitable for the DNA60 chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 14, 15cm each, red/black
- 2 x AWG 16, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Suitable for the DNA60 chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 14, 15cm each, red/black
- 2 x AWG 16, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Suitable for the DNA250C chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 12, 15cm each, red/black
- 2 x AWG 18, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Suitable for the DNA60 chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 14, 15cm each, red/black
- 2 x AWG 18, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Suitable for the DNA60C chip according to Evolv specifications
- Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 cl.6
- 2 x AWG 14, 15cm each, red/black
- 2 x AWG 18, 15cm each, red/black
- 2 x AWG 24, 15cm each, red/black
- Sizes specially adapted for modding
- From 2mm cable (AWG22) up to 510, push button, mosfet
- In the colors red and black
- Shrink ratio 2:1
- Lock Ring designed for the ReseT ModS 510 Squonk Connector.
- Perfect fit for the ReseT nut.
- Printed in very high quality using SLS (Selective Laser Sintering).
- Precisely fitting production, nothing wobbles here.
- To install the display , first connect the display to the board. Then insert the display into the holder and press it carefully and to its full width (use both hands).
- 8 pieces
- .
- 62 x 12 mm each
- Made from neodymium-iron-boron (Nd2Fe14B)
- Surface nickel-plated (Ni-Cu-Ni)
- Various heights
- 8 pieces per pack.
Graduated prices for all magnets
Graduated prices for all magnets
Graduated prices for all magnets
Items 1 - 50 of 51