Bestseller
PLEASE NOTE: Evolv now sells the DNA 60 chipset without the USB charging board. The charging board can be purchased from us individually, or here in a bundle.
- The update of the popular DNA60 chipset
- Color dispay with 160 × 40 OLED screen
- USB-C charging board with 2 amps
- Replay function
- And of course all the functions of the DNA60 such as temperature control, Preheat and Boost, as well as your own settings with Escribe
ATTENTION: Evolv now sells the DNA 60 chipset without the USB charging board. The charging board can be purchased separately or here in a bundle.
- Up to 60 watts and 128 × 32 OLED screen
- Temperature control for Ni200 nickel, titanium and stainless steel wire
- Functions: Preheat, Boost
- Custom settings / curves with free Escribe software
- Input (batteries in series): 1/1S
- Data sheet and manual: DNA 60.pdf
- Control software: EScribe
- Link to the manufacturer: Evolv
- Very high quality and excellent conductivity.
- 100% leakage-free due to special design.
- Pin can be adapted to the vaporizer from the outside.
- Shorter lower pin for larger bottles.
- Connector made of steel, nut and pin made of silver-plated brass
- Original EVOLV spare part. Possible alternatives:
- OLED Monochrome Display Big (128 x 32): For DNA 40 / 60 / 75 / 200 and 250
- OLED Monochrome Display Small ( 96 x 16 ): For DNA 60
- TFT color display (160 x 40): For DNA 60C
- TFT color display (128 x 128): For DNA 80C
- TFT color display (160 x 80): For DNA 75C / 100C and 250C
Important note on Lost Vape DNA battery packs:
Lost Vape uses both the original Evolv displays and displays with an approx. 10mm shorter band. Our displays are the original Evolv. These can also replace the displays with a shorter band.
Stealth Vape, as an official Evolv warranty, service and repair partner, writes about installation:
You can bend the narrower part of the vape . never bend the wider part of the tape. And bend, never kink!
Gap dimensions (for acrylic sheet)
- Gap width: 5.1mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
- Gap length: Version 180mm: 150mm; 200mm: 170mm; 240mm: 210mm; 300mm: 270mm (rounded corners)
- Gap depth: 2.1mm
LED version
- Warm white (2700 Kelvin).
- Possible alternatives on request: warm white/neutral white/mixed or RGB.
Basic version
- Length 180mm, 200mm, 240mm or 300mm.
Other quantities or different combinations required? Please contact us.
