Gap dimensions (for acrylic sheet)
- Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm sheet
- Gap length: 94.5mm (rounded corners)
- Gap depth 3 colors: 19.1mm, 7 colors: 18.4mm
LED version
-
3 colors: Warm white, neutral white, mixed
- Dimmer
-
7 colors: red, green, blue, yellow, cyan, pink, white
- Dimmer, color change, color transition (fast/slow)
Would you like other quantities or different combinations? Please contact us.
ATTENTION: Evolv now sells the DNA 60 chipset without the USB charging board. The charging board can be purchased separately or here in a bundle.
- The update of the popular DNA60 chipset
- Color display with 160 × 40 OLED screen
- USB-C charging board with 2 amps
- Replay function
- And of course all the functions of the DNA60 such as temperature control, preheat and boost, as well as custom settings with Escribe
Gap dimensions (for acrylic sheet)
- Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
- Gap length: 119mm (rounded corners)
- Gap depth 1 color: 22.3mm, 3 colors: 21.5mm, 7 colors: 19.5mm
LED version
- 1 color: warm white
-
3 colors: Warm white, neutral white, mixed
- Dimmer
-
7 colors: red, green, blue, yellow, cyan, pink, white
- Dimmer, color change, color transition (fast/slow)
Would you like other quantities or different combinations? Please contact us.
ATTENTION: Evolv now sells the DNA 60 chipset without the USB charging board. The charging board can be purchased separately or here in a bundle.
- Up to 60 watts and 128 × 32 OLED screen
- Temperature control for Ni200 nickel, titanium and stainless steel wire
- Functions: Preheat, Boost
- Custom settings / curves with free Escribe software
- Input (batteries in series): 1/1S
- Data sheet and manual: DNA 60.pdf
- Control software: EScribe
- Link to the manufacturer: Evolv
- Original EVOLV spare part. Five possible alternatives:
- OLED Monochrome Display Big (128 x 32): For DNA 40 / 60 / 75 / 200 and 250
- OLED Monochrome Display Small (96 x 16): For DNA 60
- TFT color display (160 x 40): For DNA 60C
- TFT color display (128 x 128): For DNA 80C
- TFT color display (160 x 80): For DNA 75C / 100C and 250C
Important note on Lost Vape DNA battery carriers:
Lost Vape uses both the original Evolv displays, as well as displays with an approx. 10mm shorter band. Our displays are the original Evolv. These can also replace the displays with a shorter band.
Stealth Vape, as an official Evolv warranty, service and repair partner, writes for installation:
You can bend the narrower part of the band. Never bend the wider part of the vape. And bend, do not kink!
- Very space-saving with a total length of only 15.8 mm .
- Pleasant and not too loud "click" .
- Stable colors due to anodization .
- Made from aluminum/stainless steel .
- RoHs, IP67, IK08 certification .
- Both charging and Esribe data connection possible
- USB-C/USB-Micro connection, 1/2 amp charging power
- Integrated LED lights up as battery status indicator. Red = battery is charging; Green = battery is fully charged; Orange = no battery available
- Two mounting holes for easy attachment
- Quality cable from the German manufacturer.
- We always deliver (per color) in one piece. This means that if you order 2 pieces, you will receive 2m in one piece. If you order "3", you will receive 3m in one piece, etc.
- Highly flexible and fine-stranded according to DIN VDE 0295 class 6
- Individual wires with 0.05mm² (up to 16AWG) or 0.07mm² (from 18AWG)
- Temperature range -80 to 260 °C
- Original Reset Mods components
- A connector for the drip tip
- A connector for the current in the variations "mechanical" or "regulated"
- Works with all Boro (bridges) and tanks
- Very absorbent.
- Hardly takes on the taste of the liquid (well suited for frequent liquid changes).
- Lasts a very long time, is relatively heat-resistant and hardly cokes.
- Can be processed very well.
- Contents approx. 5 grams.