Bestseller

Gap dimensions (for acrylic sheet)

• Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm sheet
• Gap length: 94.5mm (rounded corners)
• Gap depth 3 colors: 19.1mm, 7 colors: 18.4mm

LED version

• 3 colors: Warm white, neutral white, mixed
  • Dimmer
• 7 colors: red, green, blue, yellow, cyan, pink, white
  • Dimmer, color change, color transition (fast/slow)

Would you like other quantities or different combinations? Please contact us.

Gap dimensions (for acrylic sheet)

• Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
• Gap length: 119mm (rounded corners)
• Gap depth 1 color: 22.3mm, 3 colors: 21.5mm, 7 colors: 19.5mm

LED version

• 1 color: warm white
• 3 colors: Warm white, neutral white, mixed
  • Dimmer
• 7 colors: red, green, blue, yellow, cyan, pink, white
  • Dimmer, color change, color transition (fast/slow)

Would you like other quantities or different combinations? Please contact us.

• Original EVOLV spare part. Possible alternatives:
• OLED Monochrome Display Big (128 x 32): For DNA 40 / 60 / 75 / 200 and 250
• OLED Monochrome Display Small ( 96 x 16 ): For DNA 60
• TFT color display (160 x 40): For DNA 60C
• TFT color display (128 x 128): For DNA 80C
• TFT color display (160 x 80): For DNA 75C / 100C and 250C

Important note on Lost Vape DNA battery packs:

Lost Vape uses both the original Evolv displays and displays with an approx. 10mm shorter band. Our displays are the original Evolv. These can also replace the displays with a shorter band.

Stealth Vape, as an official Evolv warranty, service and repair partner, writes about installation:

You can bend the narrower part of the vape . never bend the wider part of the tape. And bend, never kink!

ATTENTION: Evolv now sells the DNA 60 chipset without the USB charging board. The charging board can be purchased separately or here in a bundle.

• The update of the popular DNA60 chipset
• Color display with 160 × 40 OLED screen
• USB-C charging board with 2 amps
• Replay function
• And of course all the functions of the DNA60 such as temperature control, preheat and boost, as well as custom settings with Escribe

• The original from the USA .
• Insulation made of zirconia ceramic. This material can withstand temperatures of over 1000°C and offers excellent insulation .
• High-performance connector with a permanent load capacity of up to 500 watts .
• Suitable for all chipsets on the market .
• With 11.25mm also suitable for small mods.

Gap dimensions (for acrylic sheet)

• Gap width: 4.7mm (± 0.1mm). Suitable for 3 to 4.5mm acrylic sheet
• Gap length: 71.5mm
• Gap depth: 16.3mm

LED version

• 16 colors (with remote control), 7 colors (with Smart Touch)
• Dimming, flashing, color change, color transition

Would you like other quantities or different combinations? Please contact us.

• The best MOSFET for moderators and makers
• Allows the use of any fire button. Also recommended as a safety device for high-amp fire switches.
• The required 15K Ohm resistor is also included.
• Alternatively with one or two MHP-TA15-9-72 fuses.
• This trips at 75°C and opens again when it gets colder

• Very space-saving with a total length of only 15.8 mm .
• Pleasant and not too loud "click" .
• Stable colors due to anodization .
• Made from aluminum/stainless steel .
• RoHs, IP67, IK08 certification .