Gap dimensions (for acrylic sheet)

• Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm sheet
• Gap length: 94.5mm (rounded corners)
• Gap depth 3 colors: 19.1mm, 7 colors: 18.4mm

LED version

• 3 colors: Warm white, neutral white, mixed
  • Dimmer
• 7 colors: red, green, blue, yellow, cyan, pink, white
  • Dimmer, color change, color transition (fast/slow)

Would you like other quantities or different combinations? Please contact us.

• Original EVOLV spare part. Five possible alternatives:
• OLED Monochrome Display Big (128 x 32): For DNA 40 / 60 / 75 / 200 and 250
• OLED Monochrome Display Small (96 x 16): For DNA 60
• TFT color display (160 x 40): For DNA 60C
• TFT color display (128 x 128): For DNA 80C
• TFT color display (160 x 80): For DNA 75C / 100C and 250C

Important note on Lost Vape DNA battery carriers:

Lost Vape uses both the original Evolv displays, as well as displays with an approx. 10mm shorter band. Our displays are the original Evolv. These can also replace the displays with a shorter band.

Stealth Vape, as an official Evolv warranty, service and repair partner, writes for installation:

You can bend the narrower part of the band. Never bend the wider part of the vape. And bend, do not kink!

Gap dimensions (for acrylic sheet)

• Gap width: 5.2mm (± 0.1mm). Suitable for up to 5mm acrylic sheet
• Gap length: 119mm (rounded corners)
• Gap depth 1 color: 22.3mm, 3 colors: 21.5mm, 7 colors: 19.5mm

LED version

• 1 color: warm white
• 3 colors: Warm white, neutral white, mixed
  • Dimmer
• 7 colors: red, green, blue, yellow, cyan, pink, white
  • Dimmer, color change, color transition (fast/slow)

Would you like other quantities or different combinations? Please contact us.

• The best MOSFET for moderators and makers
• Allows the use of any fire button. Also recommended as a safety device for high-amp fire switches.
• The required 15K Ohm resistor is also included.
• Alternatively with one or two MHP-TA15-9-72 fuses.
• This trips at 75°C and opens again when it gets colder

• The popular Source Connector from Steath-Vape in version 3.
• Available with 22 and 30 mm top cap.
• Each in the colors silver (stainless steel) and black.
• As well as with the standard and vFlat soldering options.
• Now again with the usual M10 thread.