Tool / Material
Items 1 - 7 of 7
- 8 pieces
- .
- each 62 x 12 mm
- Special tool from Fat Daddy Vapes
- On the one hand a drill for the 510 hole
- On the other hand a tap for the 510 thread
- So the 510 sits absolutely tight
- Also for boxes with already existing 510 hole
- Universal 2k epoxy resin adhesive, room temperature curing
- Preparation: Surfaces to be bonded should be dry, free of dust, grease and other contaminants
- Processing: Cut open the sachet, empty the contents completely and mix both components intensively for approx. 30 s
- Working time 4 minutes. Curing Manual strength 8 minutes, functional strength 2 hours, final strength 24 hours.
- ✔ Conveniently packaged in packs of 2.
- Composition: 3.5 % silver, 0.7 % copper, 93.8 % tin; flux content: 2 %; melting point 217° C
- significantly improved electrical conductivity due to silver content (3.5 %)
- no cleaning of solder joints after soldering necessary
- "No-clean solution" with continuous flux cores
- halogen-free and low smoke emission.
- Sizes specially adapted for modding
- From 2mm cable (AWG22) up to 510s, pushbuttons, mosfet
- In the colors red and black
- Shrink ratio 2:1
- Impressive values. Available in white, black or white angled. .
- Made of 302 stainless steel and Zirconia ceramic. .
- Temperature resistance up to 1600°C and hardness greater than HRC40° . .
- Matte finish with Coil Master lettering . .
- Certificate of authenticity for online verification on the back of the packaging.
Items 1 - 7 of 7