Vape & Make 510 squonker connector, 24mm black / no Vari nut

Vape & Make 510 squonker connector, 24mm black / no Vari nut

SKU: VM-510BF-24-005
HAN: Vape & Make VM BF 24 schwarz ohne Nuss
Manufacturers: Vape & Make

Developed in cooperation with our partner Feed3D Mods .

Left-hand thread to prevent accidental loosening .

Vari nut (sheet metal stop point) with double flattened contact point .

Protection against accidental turning of the nut .

Complete plus-pole contacts gold-plated .

Color / Vari Nut: Black / no Vari nut9,25 €

Black / Small (Ø 10mm, |----| 3/4mm)10,10 €

Black / Medium (Ø 13mm, |----| 4.5/5.5mm)10,08 €

Black / Large (Ø 16mm, |----| 6/7mm)10,08 €

9,25 €

incl. 19% VAT , plus

From	Unit price / Piece
3	8,15 €*
5	7,82 €*
10	7,47 €*
20	7,18 €*

When buying different article variants together, the scale prices also apply.

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

This item has variations. Please select the requested variation.

Configure

Matching accessories

optional

Order now - in a bundle with discount

V&M copper plates for 18650 squonker +22,08 € +21,53 €

Two copper sheets suitable for the TLF#
With some adaptation also suitable for many other squonkers
Hole for 510 pre-drilled, elevations for battery support
Rounded corners, de-radiused.

Item details

Quantity: 1

Fat Daddy 510 Connection Tool +4,43 € +4,00 €

Simple but ingenious tool
Fixes the 510 connector for easy installation

Item details

Quantity: 1

Your configuration

incl. 19% VAT , plus shipping costs

Piece

Description

A 510 connector from Germany? Why not? What the American and English engineers can do, the Germans can of course do too.

A replica was of course out of the question. Instead, many areas were successfully optimized and newly developed. This has led to significant improvements, particularly in the areas of "volt drop" and "seat strength".

The reduction in volt drop is essentially achieved through two measures. Firstly, the entire positive pole is gold-plated. This includes both the tube in the center core and the nut to which the (copper/silver plate) is connected. On the other hand, the nut is flattened on one side. This means that the sheet no longer rests on just one point but has a surface area of 5.3 x 4 mm.

The nut is held in place with the aid of an Allen grub screw. This allows it to be adjusted in height. The grub screw is located opposite the flattened side. When it is tightened, the flattened side, i.e. exactly where the main current flow takes place, pulls firmly against the gold-plated tube. Another plus point against the volt drop.

The thread of the 510 and the nut are designed as a left-hand thread. This makes installation in the mod somewhat more difficult. However, there is no risk of the connector accidentally coming loose during use.

The connector is available in silver and black. The black color was applied using PVD coating. It has a hardness greater than 2000HV, so nothing scratches here. The coating is also electrically conductive. The coating between the nut and the top cap has been intentionally wiped to enable an even better current flow.

A silicone ring is incorporated into the center core. This is not absolutely necessary and serves more as a double safety feature.

The entire center core is pressed into the 510. This means that nothing can come loose in the long term.

Product safety information

Manufacturer information:

Vape & Make, Nikolai von Brevern
Tueleck 8
48336 Sassenberg, Nordrhein-Westfalen, Deutschland
info@vapeandmake.com
https://vapeandmake.com

Matching accessories

Fat Daddy 510 Connection Tool

4,43 € *

V&M copper plates for 18650 squonker

from

20,22 € *