Direct from the manufacturer, the company Stealth Vape in England - the new Source 510 connector V3 M10.
The connector is available with two soldering options. Standard: Vertical soldering directly into the center pin. vFLAT: Horizontal soldering to a pre-tinned connector.
Equipped with 22mm or 30mm Top Cap, each as "Flat Top" , i.e. without cutouts. Since the Top Cap has a thickness of only 1mm, it is not necessary to make a recess in the housing.
Available in silver (stainless steel) or black, the black color has been vacuum deposited (PVD process) and is therefore extremely durable.
The connector can be soldered without prior disassembly, use flux and do not exceed the melting point of PTFE at 327 ° C.
Technical data.
- C14500 Tellurium Copper Core - Provides resistance stability and is tarnish/oxidation resistant. Pre-tinned (RoHS compliant) for superior solder bonding.
- Two-Piece PEI Insulator - Insulated at top and bottom to ensure no current flows through the spring.
- Double O-rings - Both the center pin and insulator have an O-ring that provides leak-proof operation for pressures of 25 psi and above. (Tested with compressed air up to 25 psi/1.7 bar).
- C14500 Copper vFLAT - Horizontal solder option with the innovative pre-tinned (RoHS compliant) vFLAT solder termination.
- Stainless Steel Wave Spring - Custom manufactured to provide over 7 kg of force at full compression.
| Color: |
Silver / Stainless steel |
| Height: |
13.35 mm |
| Top cap Ø: |
30 mm |
| Dimensions
( Length × Width × Height ):
|
3,00 × 3,00 × 1,34 cm |
| Included items: |
Article itself |
| Material: |
Stainless steel, copper, PEI (high performance plastic) |
Product safety information
Manufacturer information:
SVIUK LTD
Queen Street 190
HU19 2LG Withernsea,
Vereinigtes Königreich
sales@stealthvape.co.uk
https://www.stealthvape.co.uk
Responsible person:
Vape & Make, Nikolai von Brevern
Tueleck 8
48336 Sassenberg,
Nordrhein-Westfalen, Deutschland
info@vapeandmake.com
https://vapeandmake.com
