Evolv

• Original EVOLV spare part. Five possible alternatives:
• OLED Monochrome Display Big (128 x 32): For DNA 40 / 60 / 75 / 200 and 250
• OLED Monochrome Display Small (96 x 16): For DNA 60
• TFT color display (160 x 40): For DNA 60C
• TFT color display (128 x 128): For DNA 80C
• TFT color display (160 x 80): For DNA 75C / 100C and 250C

Important note on Lost Vape DNA battery carriers:

Lost Vape uses both the original Evolv displays, as well as displays with an approx. 10mm shorter band. Our displays are the original Evolv. These can also replace the displays with a shorter band.

Stealth Vape, as an official Evolv warranty, service and repair partner, writes for installation:

You can bend the narrower part of the band. Never bend the wider part of the vape. And bend, do not kink!

• Up to 100 watts.
• 160 x 80 TFT color screen.
• Temperature control .
• Functions: Replay, Preheat, Boost .
• Custom settings with free Escribe software.

• Up to 400 watts and 160 x 80 TFT color screen.
• Temperature control for Ni200 nickel, titanium and stainless steel wire.
• Functions: Replay, Preheat, Boost .
• Custom settings / curves with free Escribe software.
• Input (batteries in series): 2 to 4 / 2S to 4S.

• Data sheet and manual: DNA 250 Color.pdf .
• Control software: EScribe .
• Link to the manufacturer: Evolv .

ATTENTION: Evolv now sells the DNA 60 chipset without the USB charging board. The charging board can be purchased separately or here in a bundle.

• Up to 60 watts and 128 × 32 OLED screen
• Temperature control for Ni200 nickel, titanium and stainless steel wire
• Functions: Preheat, Boost
• Custom settings / curves with free Escribe software
• Input (batteries in series): 1/1S

• Data sheet and manual: DNA 60.pdf
• Control software: EScribe
• Link to the manufacturer: Evolv

ATTENTION: Evolv now sells the DNA 60 chipset without the USB charging board. The charging board can be purchased separately or here in a bundle.

• The update of the popular DNA60 chipset
• Color display with 160 × 40 OLED screen
• USB-C charging board with 2 amps
• Replay function
• And of course all the functions of the DNA60 such as temperature control, preheat and boost, as well as custom settings with Escribe

• Up to 75 watts and 160 x 80 TFT color screen.
• Temperature control for Ni200 nickel, titanium and stainless steel wire.
• Functions: Preheat, Boost .
• Custom settings / curves with free Escribe software.
• Input (batteries in series): 1 / 1S.

• Data sheet and instructions: DNA 75 Color.pdf.
• Control software: EScribe.
• Link to the manufacturer: Evolv.

• Extra compact for boro and side-by-side mods
• Large TFT color display
• USB-C fast charging with 3 amps
• Replay and boost function, as well as custom settings with Escribe
• Safety functions such as reverse polarity protection and cell monitoring

• Both charging and Esribe data connection possible
• USB-C/USB-Micro connection, 1/2 amp charging power
• Integrated LED lights up as battery status indicator. Red = battery is charging; Green = battery is fully charged; Orange = no battery available
• Two mounting holes for easy attachment