Evolv DNA 250C (Color) Board without board holder

Evolv DNA 250C (Color) Board without board holder

SKU: EV-DNA-250C-ohne
HAN: Evolv DNA250C ohne Halter
Manufacturers: Evolv

Data sheet and instructions: DNA 250 Color.pdf .
Control software: EScribe .
Link to the manufacturer: Evolv .

7398: Board holder70,32 €

Board holder69,34 €

69,34 €

incl. 19% VAT , plus

From	Unit price
1	69,34 €*

When buying different article variants together, the scale prices also apply.

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

This item has variations. Please select the requested variation.

Configure

Matching accessories

optional

Order now - in a bundle with discount

2 x Delo Duopox rapid 01, 2-component universal high-performance epoxy adhesive, 3g +8,71 € +8,28 €

Universal 2k epoxy resin adhesive, room temperature curing
Preparation: Surfaces to be bonded should be dry, free of dust, grease and other contaminants
Processing: Cut open the sachet, empty the contents completely and mix both components intensively for approx. 30 s
Working time 4 minutes. Curing Manual strength 8 minutes, functional strength 2 hours, final strength 24 hours.
✔ Conveniently packaged in packs of 2.

Item details

Quantity: 1

V&M button for Evolv DNA boards, golden yellow (brass) +6,93 € +6,50 €

Four push buttons for Evolv DNA boards. One large power button (Ø 8mm) and three small control buttons (Ø 4mm)
Length optimized for boxes with a wall thickness of 2mm
Three different colours/materials: silver (stainless steel), black (anodized aluminium), golden yellow (brass)

Item details

Quantity: 1

V&M button for Evolv DNA boards, color: silver (stainless steel) +6,65 € +6,22 €

Four push buttons for Evolv DNA boards. One large power button (Ø 8mm) and three small control buttons (Ø 4mm)
Length optimized for boxes with a wall thickness of 2mm
Three different colours/materials: silver (stainless steel), black (anodized aluminium), golden yellow (brass)

Item details

Quantity: 1

Goobay solder lead-free, with flux, 3.5% silver, ø 1.0 mm, 12.5 g +5,02 € +4,47 €

Composition: 3.5 % silver, 0.7 % copper, 93.8 % tin; flux content: 2 %; melting point 217° C
significantly improved electrical conductivity due to silver content (3.5 %)
no cleaning of solder joints after soldering necessary
"No-clean solution" with continuous flux cores
halogen-free and low smoke emission.

Item details

Quantity: 1

Cable set for DNA250C, red/black, AWG 12, 18, 24, 15cm each - Item currently out of stock +4,33 € +3,91 €

Suitable for DNA250C chip according to Evolv specifications
Silicone cable highly flexible and fine-stranded according to DIN VDE 0295 Kl.6
2 x AWG 12, each 15cm, red/black
2 x AWG 18, each 15cm, red/black
2 x AWG 24, each 15cm, red/black

Item details

Quantity: 1

V&M heat shrink tubing assortment, black/red, 127 parts, 2/2.5/3.5/5/7/10/13mm +4,11 € +3,56 €

Sizes specially adapted for modding
From 2mm cable (AWG22) up to 510s, pushbuttons, mosfet
In the colors red and black
Shrink ratio 2:1

Item details

Quantity: 1

Your configuration

incl. 19% VAT , plus shipping costs

Description

The DNA 250 Color is a power regulated digital switch-mode DC-DC converter for personal vaporizers.

It features Evolv's patented Wattage Control, patented-pending Replay and Temperature Protection, Preheat, Onboard Buttons, Synchronous Rectification for maximum battery life and minimal heat generation, and a 160 x 80 pixel Color TFT Screen.

The DNA 250 Color runs from a 2, 3, or 4 cell lithium polymer battery, and features cell-by-cell battery monitoring and an integrated 2A balance charger.

Evolv's EScribe 2.0 and Theme Designer software can be used to make the DNA 250 Color look and act exactly like you want.

Designed for ease of use while allowing complete customization, the DNA 250 Color is vaping down to a science.

Dimensions ( Length × Width × Height ):	7,00 × 2,00 × 0,85 cm
Included items:	DNA250C board, 0.9" TFT color display, balance connector
Plug type:	USB, 1 amp

Product safety information

Manufacturer information:

Evolv LLC
Hudson Dr. 5171
44236 Hudson, Ohio, Vereinigte Staaten
sales@evolvapor.com
https://www.evolvapor.com/

Responsible person for the EU:

Vape & Make, Nikolai von Brevern
Tueleck 8
48336 Sassenberg, Nordrhein-Westfalen, Deutschland
info@vapeandmake.com
https://vapeandmake.com

Matching accessories