Evolv displays and accessories

• Original EVOLV spare part

Three alternatives:

• 160 x 80 TFT color display: For DNA 75C / 100C and 250C
• 128 x 32 OLED Monochrome Display Big: For DNA 40 / 60 / 75 / 200 and 250
• 96 x 16 OLED Monochrome Display Small: For DNA 60
• TFT color display for DNA60C

Important note on Lost Vape DNA battery carriers:

Lost Vape uses both the original Evolv displays, as well as displays with an approx. 10mm shorter band. Our displays are the original Evolv. These can also replace the displays with a shorter band.

Stealth Vape, as an official Evolv warranty, service and repair partner, writes for installation:

You can bend the narrower part of the band. Never bend the wider part of the vape. And bend, do not kink!

• Four push buttons for Evolv DNA boards. One large power button (Ø 8mm) and three small control buttons (Ø 4mm)
• Length optimized for boxes with a wall thickness of 2mm
• Three different colours/materials: silver (stainless steel), black (anodized aluminium), golden yellow (brass)

• Printed in very high quality using SLS (Selective Laser Sintering).
• Precisely fitting production, nothing wobbles here.
• To install the display , first connect the display to the board. Then insert the display into the holder and press it carefully and to its full width (use both hands).

• Both charging and Esribe data connection possible
• USB-C/USB-Micro connection, 1/2 amp charging power
• Integrated LED lights up as battery status indicator. Red = battery is charging; Green = battery is fully charged; Orange = no battery available
• Two mounting holes for easy attachment

• DNA60 software update / adjustments using the Escribe software
• Especially for billet box/boro mods with DNA60 chipset
• Original DNA60 data/charging board with modifications
• DISCONNECT BATTERY BEFORE USE

• With these parts you can extend the length of the ribbon cable of the Evolv DNA boards
• Also works with other devices that use 8-pin SFVL connectors from Amphenol (FCI)
• Consisting of cable with coupling