Electronics

ATTENTION: Evolv now sells the DNA 60 chipset without the USB charging board. The charging board can be purchased separately or here in a bundle.

• The update of the popular DNA60 chipset
• Color display with 160 × 40 OLED screen
• USB-C charging board with 2 amps
• Replay function
• And of course all the functions of the DNA60 such as temperature control, preheat and boost, as well as custom settings with Escribe

• Original EVOLV spare part. Possible alternatives:
• OLED Monochrome Display Big (128 x 32): For DNA 40 / 60 / 75 / 200 and 250
• OLED Monochrome Display Small ( 96 x 16 ): For DNA 60
• TFT color display (160 x 40): For DNA 60C
• TFT color display (128 x 128): For DNA 80C
• TFT color display (160 x 80): For DNA 75C / 100C and 250C

Important note on Lost Vape DNA battery packs:

Lost Vape uses both the original Evolv displays and displays with an approx. 10mm shorter band. Our displays are the original Evolv. These can also replace the displays with a shorter band.

Stealth Vape, as an official Evolv warranty, service and repair partner, writes about installation:

You can bend the narrower part of the vape . never bend the wider part of the tape. And bend, never kink!

• Both charging and Esribe data connection possible
• USB-C/USB-Micro connection, 1/2 amp charging power
• Integrated LED lights up as battery status indicator. Red = battery is charging; Green = battery is fully charged; Orange = no battery available
• Two mounting holes for easy attachment

• The best MOSFET for moderators and makers
• Allows the use of any fire button. Also recommended as a safety device for high-amp fire switches.
• The required 15K Ohm resistor is also included.
• Alternatively with one or two MHP-TA15-9-72 fuses.
• This trips at 75°C and opens again when it gets colder