440
Complete kits
Items 1 - 5 of 5
- Small, handy box (86 x 44 x 28mm) with 21700 battery.
- Combined chip / battery holder.
- All soldering work possible outside the box.
- Plenty of tolerance for all components.
Technical structure.
- EVOLV DNA 75 Color Board.
- 21700 battery.
- 22mm top cap.
- Chip/battery holder glued in box (not screwed).
Documentation and downloads.
- Information about the box: Assembly instructions.pdf.
- Information about the DNA 75C: DNA 75 Color.pdf.
- EVOLV control software: EScribe.
Included components.
- Box: Analog Box Mods V1 incl. magnets.
- Button: Analog Box Mods.
- 510: ModMaker 510 Micro, 22mm top cap.
- Controller: Evolv DNA 75C.
- Combined chip/battery holder: Vape & Make.
- Insulation box bottom: Vape & Make.
- Cable: Muldental silicone high flexible, 14 and 24 AWG.
- Battery contacts / solder lug: Keystone / Rosenberger.
- All required components.
- EVOLV DNA 250 color Board with reverse polarity protection.
- EVOLV DNA 75 color Board with reverse polarity protection.
- Designed for 2 batteries in series connection (2S)
- External dimensions 89 x 61 x 28, internal dimensions 84 x 57 x 24 mm
Technical structure
- 2 x 18650 batteries, connected in series.
- EVOLV DNA 250 color Board with reverse polarity protection.
- EVOLV DNA 75 color Board with reverse polarity protection.
- 22mm top cap.
- Chip holder glued in box (not screwed).
Documentation and downloads
Included components
- Box: Analog Box Mods V2 incl. magnets.
- 510: Fat Daddy Vapes / ModMaker / Steathvape.
- Controller: Eolv DNA 250C.
- Controller: Eolv DNA 75C.
- Chip holder: Vape & Make 3D laser sinter print.
- Button: Analog Box Mods.
- Battery holder: Vape & Make 2 x 18650, ground on the right side.
- Battery holder contacts: Keystone 4 x 1107-1
- Cable: Silicone highly flexible, 2 x 15cm each 14 AWG, 16AWG and 24 AWG.
- +/- Warning stickers: Fat Daddy Vapes, 4 pieces.
Out of stock
- All required components.
- EVOLV Color Board with reverse polarity protection.
- Designed for 2 batteries in series connection (2S).
- External dimensions 96 x 65 x 32, internal dimensions 91 x 61 x 28 mm.
Technical design.
- 2 x 20700/21700 batteries, connected in series.
- EVOLV Color Board with reverse polarity protection.
- 22mm top cap.
- Chip holder glued in box (not screwed).
Documentation and downloads.
Included components.
- Box: Analog Box Mods V2 incl. magnets.
- 510: Fat Daddy Vapes / ModMaker / Steathvape.
- Controller: Eolv DNA 250C / DNA 75C.
- Chip holder: Vape & Make 3D print.
- Button: Analog Box Mods.
- Battery holder: MosMax 2 x 21700.
- Cable: Silicone highly flexible, 2 x 15cm 14, 18 and 24 AWG each.
- +/- Warning stickers: Fat Daddy Vapes, 4 pieces.
- All required components.
- EVOLV DNA 250 color board with reverse polarity protection.
- Designed for Lipo battery.
- External dimensions 125 x 65 x 40, internal dimensions 120 x 61 x 36 mm.
Technical structure.
- EVOLV DNA 250 color board with reverse polarity protection.
- 30mm top cap.
- Chip holder glued in box (not screwed).
Documentation and downloads.
Included components.
- Box: Analog Box Mods NX incl. magnets.
- 510: Fat Daddy Vapes / Steathvape.
- Controller: Eolv DNA 250C.
- Chip holder: Vape & Make 3D print.
- Button: Analog Box Mods.
- Cable: Silicone highly flexible, 2 x 25cm 14 AWG and 24 AWG each.
- Plug: Amass XT60 male and XT60 female.
Important note about the LiPo battery.
Unfortunately we are not allowed to sell LiPo batteries. We recommend "Stefan's LiPo Shop" (SLS). Suitable batteries at SLS are:.
Out of stock
- All necessary parts available.
- Box with sliding closure.
- Engraving (as an option) possible.
Technical design.
- Etileno PWM control.
- 2 x 21700 battery.
- 30mm top cap.
Included components.
- Box: Vape & Make 1590B with sliding cap.
- 510: ModMaker / Steathvape.
- Controller: Etileno PWM.
- Power button: Vape & Make.
- Battery holder: MosMax 2 x 21700.
- Cable: Silicone highly flexible, 2 x 30cm 14 AWG and 24 AWG each.
- +/- Warning stickers: Vape & Make, 4 pieces.
Items 1 - 5 of 5