354
Squonk
Items 1 - 8 of 8
- Upper contact plate between 510 and battery
- Made from 999 silver
- Recess for optimum battery contact
- Recess optionally M10 for 18xxx or M12 for 20/21xxx batteries.
- Perfect for use in mechanical squonkers and mech mods
- Capacity 6ml, height 4.5cm, diameter 1.8cm .
- Food-grade silicone .
- Lid made of 304 stainless steel .
- Extra strong walls .
- Resistant up to 125°C .
- Two copper sheets suitable for the TLF#
- With some adaptation also suitable for many other squonkers
- Hole for 510 pre-drilled, elevations for battery support
- Rounded corners, de-radiused.
- Made from stainless steel .
- Black color applied with VaKuum process .
- Diameter 12mm, stop 1mm .
- Total height 4.1 mm .
- Concave rounding on the operating side.
- Outstanding properties. Developed by specialists
- Contents: very soft bottle, stainless steel cap, silicone tube and silicone seal
- Seal is not necessary, but has been included as a precaution
- Capacity of 8.5 ml (without tube in the bottle)
- Super soft silicone with a dark tint .
- Height-adjustable thanks to two accordion ribs. The height is between 45 and 50 mm .
- Capacity 6 to 8ml (without tube). The diameter is 17mm .
- Closure 13 mm, extra tight .
- Tested for food safety by the SGS Institut Fresenius .
- The bottom feeder vaporizer is leaking?
- Or you want to convert a "normal" vaporizer to a squonker?
- Here is the solution from Fat Daddy Vapes.
- For all vaporizers with M 2.5 or M 3 center pin.
- The best of both worlds, the V&M Okto silicone bottle .
- As much content as a square bottle and a pleasant squeezing sensation like a round bottle .
- Extra flat Ultem cap for more content and with a width of only 14.5 mm for more space in the mod. .
- Large bottle (18650) with 8 ml content, small bottle with 2.4 ml content (18350) .
Items 1 - 8 of 8