According to the motto "the better is the enemy of the good" here is another product in the cooperation of Feed3D Mods and Vape & Make. Internally with us already called witch hazel, because it covers everything you can wish for at this point.
The basic principle is the same as the nut of our 510 squonker connector. The live side is flattened to ensure maximum current flow. The nut is height-adjustably attached to the connector with a grub screw. And of course all current carrying parts are gold plated.
In addition, there is now a variation in the distance to the sheet metal. The plate no longer needs to be adjusted to the nut. The highlight, however, is the protection against accidental twisting when screwing on / unscrewing the evaporator. This is ensured by an additional hole and a plastic screw.
Each nut has two flattened sides and thus two possible distances to the plate. There are three different variations. The small version has a diameter of 10mm and distances of 3 or 4mm from the center of the 510. The medium version has a diameter of 13mm - 4,5 or 5,5 mm and the large version 16mm with 6 or 7mm distance.
The nut fits all common Sqouker connectors on the market. Optimal of course to our own connector.
Scope of delivery: |
|