V&M Standard Kit Untreated (Aluminium)

Item number: VM-Kit-Standard-003

  • All required components
  • EVOLV DNA 250 color Board with reverse polarity protection
  • Designed for 2 batteries in series connection (2S)
  • Outer dimensions 89 x 61 x 28, inner dimensions 84 x 57 x 24 mm

Technical construction

  • 2 x 18650 battery, in series connection
  • EVOLV DNA 250 color Board with reverse polarity protection
  • 22mm top cap
  • Chip holder glued in box (not screwed)

Documentation and Downloads

Included Components

  • box: Analog Box Mods V2 incl. magnets
  • 510s: Fat Daddy Vapes / ModMaker / Steathvape
  • Controller: Eolv DNA 250C
  • Chip holder: Vape & Make 3D printing
  • Button: Analog Box Mods
  • Battery holder: MosMax 2 x 18650
  • Cable: Silicone high flexible, 2 x 25cm 14 AWG and 24 AWG each
  • +/- warning stickers: Fat Daddy Vapes, 4 pieces
Box color

93,14 €
including19% VAT. , plus shipping

3 Piece In stock

Shipping time: 1 - 2 workdays


Pushbutton for Evolv Board
Pushbutton for Evolv Board
  • Pushbuttons made of different materials

    • Silver - stainless steel
    • Black - anodized aluminum
    • One powerstater and 3 control buttons
    • Power button 8mm, control button 4mm
  • Pushbuttons made of different materials

    • Silver - stainless steel
    • Black - anodized aluminum
    • One powerstater and 3 control buttons
    • Power button 8mm, control button 4mm
  • Pushbuttons made of different materials

    • Silver - stainless steel
    • Black - anodized aluminum
    • One powerstater and 3 control buttons
    • Power button 8mm, control button 4mm
510 Connector, 22mm Top Cap
510 Connector, 22mm Top Cap
    • The popular Source Connector from Steath-Vape here in version 2
    • Available with 22 mm, 24 mm, 25 mm and 30 mm Top Cap
    • 22mm Top Cap also in black
    • Flat Top - without cutouts
    • The popular Source Connector from Steath-Vape here in version 2
    • Available with 22 mm, 24 mm, 25 mm and 30 mm Top Cap
    • 22mm Top Cap also in black
    • Flat Top - without cutouts
    • Tellurium Copper Core (C15500) - Provides long stability and is tarnish / oxidation resistant. RoHS tin plated for easy solder joint.
    • Two-piece PEI insulator - Insulates top and bottom to ensure no current flows through the spring.
    • Dual Ports - Both the center pin and insulator have an O-ring that allows leak-proof operation at pressures of 25 psi and above.
    • Tellurium copper vFLAT connection - Horizontal solder option with our innovative pre-tinned RoHS vFLAT solder connection.
    • Stainless Steel Wave Spring - Special design for force greater than 7 kg at full compression.
    • Particularly compact due to reduction in size to M10
    • Extra large solder hole for cables up to 10AWG
    • Two O-rings for absolute tightness
    • Materials PEEP with fiberglass, copper, silver-plated brass.
    • Extra strong spring me 4.2N for low volt drop
    • Particularly compact due to reduction in size to M10
    • Extra large solder hole for cables up to 10AWG
    • Two O-rings for absolute tightness
    • Materials PEEP with fiberglass, copper, silver-plated brass.
    • Extra strong spring me 4.2N for low volt drop
Note: For the Source V2 (Stealth Vape) 510 connectors, the pre-drilled hole in the top of the box must be expanded from M10 to M12.
EVOLV DNA 250C
EVOLV DNA 250C
You already have a DNA 250C board? No problem. Just deselect it here.
Suitable accessories
  • Suitable accessories
    • Composition: 3.5 % silver, 0.7 % copper, 93.8 % tin; flux content: 2 %; melting point 217 C
    • significantly improved electrical conductivity due to silver content (3.5 %)
    • no cleaning of solder joints after soldering necessary
    • "no-clean solution" with continuous flux cores
    • halogen-free and low smoke emission
  • Suitable accessories
    • Universal 2-component epoxy resin adhesive, room temperature curing
    • Working time 4 minutes
    • Curing time to hand strength 8 minutes
    • Curing time until functional strength 2 hours
  • Suitable accessories
    • Sizes specially adapted to modding
    • From 2mm cable (AWG22) up to 510s, pushbuttons, Mosfet
    • In the colors red and black
    • Shrink ratio 2:1
    • Reusable box with 7 adjustable compartments
V&M Standard Kit Untreated (Aluminium)
Subtotal: