V&M Mini Push Button, Ø?12mm, Red

Item number: V&M-1201-red

  • With only 14,6mm total length very space saving
  • Pleasant pressure point and not too loud "click"
  • Stable colors due to anodization
  • Made of aluminium/stainless steel
  • RoHs, IP67, IK08 certification
Color

7,34 €
including 19% VAT. , plus shipping

Available now!

Shipping time: 1 - 2 workdays

Bulk Pricing:
From 2 Piece 6,92 €
From 3 Piece 6,57 €
From 5 Piece 6,27 €

Suitable accessories
  • Suitable accessories
    • 1 meter each red and black
    • Highly flexible and fine-stranded according to DIN VDE 0295 Kl.6
    • Single cores with 0.05mm² (up to 16AWG), resp. 0.07mm² (from 18AWG)
    • Temperature range -80 to 260 °C
    • Designed for up to 48 Volt
  • Suitable accessories
    • Composition: 3.5 % silver, 0.7 % copper, 93.8 % tin; flux content: 2 %; melting point 217° C
    • significantly improved electrical conductivity due to silver content (3.5 %)
    • no cleaning of solder joints after soldering necessary
    • "no-clean solution" with continuous flux cores
    • halogen-free and low smoke emission
  • Suitable accessories
    • The best MOSFET for mod building
    • Allows the use of any fire switch. Also recommended for high amp fire buttons as a safety.
    • The required 15K Ohm resistor is also included.
    • Alternatively with one or two fuses MHP-TA15-9-72
    • This starts at 75°C and opens again when it gets colder.
  • Suitable accessories
    • 1 meter each red and black
    • Highly flexible and fine-stranded according to DIN VDE 0295 Kl.6
    • Single cores with 0.05mm² (up to 16AWG), resp. 0.07mm² (from 18AWG)
    • Temperature range -80 to 260 °C
    • Designed for up to 48 Volt
V&M Mini Push Button, Ø?12mm, Red
Subtotal:

Description

A pushbutton in a class of its own: extra small, extra slim, extra comfortable to handle. Specially designed and developed for small space requirements. Only 12.6mm deep, or 14.6mm with the solder connections.

Extremely comfortable to use despite its extremely small depth. Its quiet clicking noise sounds rich without being distracting. A somewhat firmer pressure point prevents unintentional operation without having to apply unnecessary force during use.

Special attention has also been paid to the colours. They are not only particularly stable due to anodisation but also have a distinctly strong colour tone.

Made of aluminium and certified according to RoHs, IP67 and IK08. Rubber seal for watertight closure between workpiece and pushbutton is included.

The function is "momentary" (OFF-ON). Current flows when the button is pressed. It can be loaded with up to 12V/DC and 50mA. The pressure strength is 300gf and pressure depth 0.6mm.


Material: Anodised aluminium
Current: 0.050 ampere
Voltage: 12 Volt DC