Swedish Vaper PotBelly ProDuo Verlötet

Item number: SV-PotBelly-ProDuo-AP

  • onboard 40v 100A mosfet
  • onboard voltage regulator
  • Onboard LED
  • tested up to 36v
  • limits around 65A - 75A

24,97 €

including 19% VAT. , plus shipping

Available now!

Shipping time: 1 - 2 workdays

1557 based PotBelly with onboard 40v 100A mosfet, onboard voltage regulator and a model 93 potentiometer. Onboard LED to indicate circuit is alive.

Like the other members in the PotBelly family, this unit has ZERO idle draw, and follows the same simple 3-wire hookup installation.

The 510- and B- wire terminals are clearly labelled for easy identification. BOTH negative wires point UP on this unit.

It has been tested up to 36v. Requires minimum 2S battery configuration.

The increased copper on the pcb compared with the smaller, round PotBellies means it will handle a bit more current. Exact limits not yet known, but likely around 65A - 75A.

  • You may receive either RED or BLACK version depending on the pcb's available. (currently the boards are red)

  • Other customers have also bought the following items