Original Source 510 Connector - vFlat, Black 30mm Top Cap

Item number: SV-Source-vFlat-Black-30

  • Designed by EVOLV - the manufacturer of the DNA chipsets
  • Produced by Steath-Vape in England
  • Available with 22 mm, 24 mm, 25 mm and 30 mm Top Cap
  • Flat Top - without cutouts
starting from 14,51 €
including 19% VAT. , plus shipping

6 Piece In stock

Shipping time: 1 - 2 workdays

Bulk Pricing:
From 2 Piece 14,09 €
From 3 Piece 13,74 €
From 5 Piece 13,45 €
Suitable accessories
  • Suitable accessories
    • Simple but ingenious tool
    • Fixes the 510 connector for easy installation
  • Suitable accessories
    • Composition: 3.5 % silver, 0.7 % copper, 93.8 % tin; flux content: 2 %; melting point 217° C
    • significantly improved electrical conductivity due to silver content (3.5 %)
    • no cleaning of solder joints after soldering necessary
    • "no-clean solution" with continuous flux cores
    • halogen-free and low smoke emission
  • Suitable accessories
    • 1 meter each red and black
    • Highly flexible and fine-stranded according to DIN VDE 0295 Kl.6
    • Single cores with 0.05mm² (up to 16AWG), resp. 0.07mm² (from 18AWG)
    • Temperature range -80 to 260 °C
    • Designed for up to 48 Volt
Original Source 510 Connector - vFlat, Black 30mm Top Cap
Subtotal:

Description

Designed by EVOLV in the USA, the manufacturer of the famous DNA chipsets and produced by Stealth Vape in England, the Source 510 connector.

Equipped with 22mm, 24mm, 25mm or 30mm top cap, each as "flat top", i.e. without cutouts. i.e. without cutouts. Since the top cap is only 1mm thick, it is not necessary to make a recess in the housing.

Available in five different series, each with a different design / type of solder joint. The design is available in silver (stainless steel), black and with motif. The soldering point can be chosen between a central pin (as with other connectors) and a flat surface (vFlat).

The connector can be soldered without prior disassembly. Use flux and do not exceed the melting point of PTFE at 327 ° C.

Height: 12.75 mm
Top cap Ø: 30 mm
Scope of delivery:
  • 1 x connector in the selected size
    		•

    Video

    • Stainless steel body - male thread M12x1 PTFE insulator and washer.
    • Brass serrated solder lug
    • 3mm thick 14mm nut
    • ASTM A228 conical spring with approx. 10N / 1KG force at full compression.
    • For the version with conventional solder joint, wire up to 12AWG can be accommodated.
    • With the "vFlat" variant solid 9.7 mm pre-tinned positive solder contact