MosMax 18650 Trippel Battery Holder

Item number: MM-IM3X18650

  • From modders - for modders. The original battery holders from MosMax from the USA
  • space-saving optimised down to the last millimetre
  • Maufactured from injection moulded nylon
  • Keystone contact springs

6,12 €

including 19% VAT. , plus shipping

Available now!

Shipping time: 1 - 2 workdays

Piece


MosMax Electronics battery mounts are made of strong nylon and injection molded (no 3D pressure).

They are available for 18650 and 20700/21700 cells (at 21700 they are slightly higher than the batteries on the side)

The included keystone contacts can be used for series or parallel connection. They can be soldered before installation or in the inserted condition. If used, please make sure that the nylon holder does not get loaded for too long during soldering and does not get too warm.

Flux soldering aid can be removed with acetone or alcohol without damaging the holder

IM1X18650
  • For rechargeable cell: 1 x 18650
  • Width: 19 mm
  • Length: 75.3 mm
  • Height: 14.4 mm

IM2X18650
  • For rechargeable cell: 2 x 18650
  • Width: 37 mm
  • Length: 75.3 mm
  • Height: 14.9 mm
  • cable channel: 3 mm

IM3X18650
  • For rechargeable cell: 2 x 18650
  • Width: 55.5 mm
  • Length: 78 mm
  • Height: 18.4 mm
  • >cable channel: 3.8 mm

IM1X20700
  • For rechargeable cell: 1 x 20700 or 1 x 21700 (slightly above right and left)
  • Width: 24 mm
  • Length: 82.3 mm
  • Height: 18.4 mm

IM2X20700
  • For rechargeable cell: 2 x 20700 or 2 x 21700 (slightly above right and left)
  • Width: 41 mm
  • Length: 84.7 mm
  • Height: 18.4 mm
  • Cable duct: 3.8 mm
  • 1 x battery holder in the selected greeting
  • 2 x Keystone contact springs per shaft

  • Other customers have also bought the following items