Der Fuchs

Item number: VM-Fuchs

  • No desire for always the same design? Here we go: The Weasel
  • The Housing is available at Modder itself
  • All further information we have here in a variable Accessory kit bundled

starting from 22,42 €

including 19% VAT. , plus shipping

Available now!

Shipping time: 1 - 2 workdays



Steuerung
Steuerung
    • The best MOSFET for mod building
    • Original by International Rectifier from the USA
    • Allows the use of any fire button. Also recommended as safety for high ampere fire buttons.
    • 15K Ohm resistor and resettable fuse MHP-TA15-9-72
    • Resets when temperature drops
  • A single board version of the PotBelly for very tight enclosures.Uses the tiny MIC1557 timer IC to deliver near-instant PWM power to your atty.

    Rated 35A-45A (lowest recommended build 0.3ohm at 3S)

    1S to 4S compatible (2v - 18v)

    Simple 3 wire installation (same as standard PotBelly)

    Reverse polarity protection

    • Tiny
    • Rated 35A-45A (lowest recommended build 0.3ohm at 3S)
    • 1S to 4S compatible (2v - 18v)
    • Simple 3 wire installation (same as standard PotBelly)
    • Reverse polarity protection
    • onboard 40v 100A mosfet
    • onboard voltage regulator
    • Onboard LED
    • tested up to 36v
    • limits around 65A - 75A
Powertaster - Farbe
Powertaster - Farbe
    • Pushbutton from Dripp3D in the USA
    • With only 12mm length optimal for every mod
    • Acceptable and not too loud "click"
    • Stable colours due to anodisation
    • Made of stainless steel / anodized aluminum
    • Pushbutton from Dripp3D in the USA
    • With only 12mm length optimal for every mod
    • Acceptable and not too loud "click"
    • Stable colours due to anodisation
    • Made of stainless steel / anodized aluminum
    • Pushbutton from Dripp3D in the USA
    • With only 12mm length optimal for every mod
    • Acceptable and not too loud "click"
    • Stable colours due to anodisation
    • Made of stainless steel / anodized aluminum
    • Pushbutton from Dripp3D in the USA
    • With only 12mm length optimal for every mod
    • Acceptable and not too loud "click"
    • Stable colours due to anodisation
    • Made of stainless steel / anodized aluminum
Voltmeter - Farbe
Voltmeter - Farbe
    • Developed by Fat Daddy Vapes
    • volt measurement from 2.5 to 9 volts
    • 28mm Length when fixed to the lateral eyelets
    • Voltmeter is PWM compatible
    • Developed by Fat Daddy Vapes
    • volt measurement from 2.5 to 9 volts
    • 28mm Length when fixed to the lateral eyelets
    • Voltmeter is PWM compatible
    • Developed by Fat Daddy Vapes
    • volt measurement from 2.5 to 9 volts
    • 28mm Length when fixed to the lateral eyelets
    • Voltmeter is PWM compatible
    • Developed by Fat Daddy Vapes
    • volt measurement from 2.5 to 9 volts
    • 28mm Length when fixed to the lateral eyelets
    • Voltmeter is PWM compatible
    • Developed by Fat Daddy Vapes
    • volt measurement from 2.5 to 9 volts
    • 28mm Length when fixed to the lateral eyelets
    • Voltmeter is PWM compatible
Your configuration

The Wiesel by Johannes Otto. A mod with its Design that stands out clearly from the crowd. And not only that. Also a first-class processing and a top service are part of the game.

The whole thing connected with the "Open Source Thoughts" - thus Reproduction not only allowed but even promoted - leads to a project that in this form probably unique might be

The Housing is available directly from Modder yourself. If you prefer to produce (print) the mod yourself, you will find all necessary 3D print templates here.

We deliver, in agreement with the modder, all other needed components. This makes it not only easier but we can also offer the accessory kit at a attractive price.

Dokumentation Zusammenbau


Other customers have also bought the following items